Gdsi-L101 Series Non-Contact Vehicle Detector Drive Shaft Identifier and Scanner for Toll Collection

• Task: Drive Shaft Detector
• Structure: Combination
• Mathematical Model: for Intelligent Transportation
• Model NO.: GDSI-L101
• Signal: Continuous
• Function: Automatic Control, Monitoring, Measurement
• Certification: CCC, ISO: 9001, CE
• Condition: New
• Customized: Customized
• Material: Metal Protection Cover
• Supply Voltage: 24VDC / 220VAC
• Transport Package: Carton Box, or Customized
• Specification: 990x295x237mm
• Trademark: G-TEK
• Origin: China
• Production Capacity: 300PCS/Month

Product Description

    The main function of identifying the driving shaft at highway toll stations is to ensure the accuracy and fairness of toll collection, prevent fare evasion, and improve traffic efficiency. By identifying the number and type of drive shafts, toll stations can accurately classify vehicles and charge according to the prescribed rates, avoiding charging disputes caused by incorrect axle identification and ensuring the fairness and transparency of charging.

    The laser drive shaft identifier is a non-contact fixed recognition system developed by Tianjin G-TEK Sensor Technology. Its working principle is based on TOF, consisting of one horizontal laser lidar, one vertical lidar and an algorithm control module. It can perform stereo scanning on vehicles, not only identifying the number of axles and single/twin tires, but also accurately identifying the driving axle parameters. 


Product Features
1. Using laser measurement technology to scan vehicles, with high detection accuracy;
2. Real time output of information on the number of axles, single or twin tires, the number and position of drive shafts, and the conversion of vehicle models
3. Suitable for various application forms such as high-speed toll stations, fixed overload control stations, material yards, etc
4. Able to replace light barries, laser vehicle detectors,loop detector, and achieve functions such as vehicle separation and event triggering
5. Integrated transmission and reception device, not affected by light interference
6. Support working in rainy, snowy and foggy weather
7. System stability, support 24/7 operation
 

General Parameters
Supply Voltage		24VDC
Power		< 101W
Light Source		Infrared laser (905nm)
Mounting Mode		Single side installation
Communication Mode		TCP/IP / RS485
Protection Rating		IP67
Accuracy Of Identifying The Number Of Axles		≥99.5%
Accuracy Of Identifying Single Or Double Tires		≥99.5%
Accuracy Of Axles Recognition		≥99.5%
Accuracy Of Drive Shaft Identification		≥99.5%
Min. Distance Between Vehicles		100mm
Vehicle Classification Accuracy		Common weather≥99.9%; Rainy, snowy, foggy weather≥99%
Allowable Vehicle Speed		≤36km/h
Detection Distance		0.2~6m
Detection Height		0.2~10m
Ambient Temperature		-20ºC~60ºC
MTBF		≥50000h
Product Performance
Laser Lidar	Model NO.	LSD101A	LMO-PNP-ENT
	Parameters	Refer to product introduction	Refer to product introduction
Wheel Axle Controller	Model NO.	LVSC3
	Current Supply	24VDC
	Power	< 2W
	Communication Mode	Ethernet/RS485
	Switch Input	3 routes,I/O 24V
	Switch Output	1 route,relay output(normally open)
	Ambient Temperature	-30ºC~60ºC
	Body Size	174mm × 106mm × 55mm