| Output Signal Type: | Switching Type |
|---|---|
| Production Process: | Integration |
| Material: | Plastic |
|
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features
Working Principle
The PS18T photoelectric sensor installed at the turnstile gate is used to detect whether someone is breaking into the turnstile gate. When the card is swiped outside the yellow line, there is no object at the gate, the sensor signal is normal and the wing gate will open; if someone enters inside the yellow line, the sensor signal at the gate changes and the wing gate will not open even if the card is swiped. This design aims to prevent the opening and closing of the wing gates when the card is swiped within a short distance, causing a safety hazard, and also to prevent break-ins.
Model
| Product Series | Product Model | Supply Voltage | SensingDistance | Housing | Output Mode | Action Mode |
| PS18T | PS18T-2ND | 10~30V DC | 20m | PC+ABS | NPN | Dark On |
| PS18T-2NL | NPN | Light On | ||||
| PS18T-2PD | PNP | Dark On | ||||
| PS18T-2PL | PNP | Light On |
| Photoelectric sensor | PS18T-2ND |
| Detection Type | Opposed type |
| Detecting Object | Min Φ18mm opaque object |
| Detecting Distance | 20m |
| Supply Voltage | 10~30V DC |
| No-load Current | Emitter: Max.12mA; Receiver: MAX.7mA |
| Response Time | Max.4ms |
| Light Source | Infrared LED(850nm) |
| Action Mode | Dark On |
| Control Output | NPN open collector |
| Indicator | Power indicator:Green Action indicator:Red |
| Circuit Protection | Reverse polarity protection, short circuit protection, over voltage protection |
| Ambient Brightness | Sunlight:Max.60000lx;Fluorescent:Max.3000lx |
| Ambient Temperature | -30~+60ºC(Non-freezing),Storage:-40~+80ºC |
| Ambient Humidity | 0~90%RH |
| Material | Housing:PC+ABS; Cable: PVC |
| Cable | Emitter:black Receiver: Grey Φ4, 2m |
| Protection Rate | IP67 |
| Accessory | Screw |
| Photoelectric sensor | PS18T-2NL |
| Detection Type | Opposed type |
| Detecting Object | Min Φ18mm opaque object |
| Detecting Distance | 20m |
| Supply Voltage | 10~30V DC |
| No-load Current | Emitter: Max.12mA; Receiver: MAX.7mA |
| Response Time | Max.4ms |
| Light Source | Infrared LED(850nm) |
| Action Mode | Light On |
| Control Output | NPN open collector |
| Indicator | Power indicator:Green Action indicator:Red |
| Circuit Protection | Reverse polarity protection, short circuit protection, over voltage protection |
| Ambient Brightness | Sunlight:Max.60000lx;Fluorescent:Max.3000lx |
| Ambient Temperature | -30~+60ºC(Non-freezing),Storage:-40~+80ºC |
| Ambient Humidity | 0~90%RH |
| Material | Housing:PC+ABS; Cable:PVC |
| Cable | Emitter:black Receiver: Grey Φ4, 2m |
| Protection Rate | IP67 |
| Accessory | Screw |
Tianjin G-TEK Sensor Technology Co., Ltd. is located in Gaotai Science and Technology Park, Xiqing District, Tianjin and it is a technology-based enterprise specialized in R&D, production and customization of intelligent sensor system solutions. The company manufactures laser radar, TOF3D camera, laser ranging sensor, measurement and safety light curtain, photoelectric sensor, proximity switch and other products with core technology, serving intelligent transportation, logistics automation, factory automation, robot, intelligent security and other fields.
Q: What kind of products do you manufacture?
A: Our products include photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.
Q: Can I get some samples?
A: Yes, Sample orders are welcomed.
Q: Have photocell sensors 100% assembled well in stock?
A: We have some standard photocell sensors in stock with limited quantity; While
almost all photocell sensors will be newly produced according to your order.
Q: What is the delivery time?
A: 15-30 days for mass production depends on different products
Q: What is your MOQ?
A: We provide small MOQ for each item; it depends on your specific order.
Q: Do you have customization service?
A: Yes, We can provide customized products while the customization needs to meet certain quantity.
Q: Do you test all goods before delivery?
A: Yes, We have 100% test before delivery.
Q: What is your payment term?
A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.
Q: Do you provide warranty for the goods?
A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.
Q: May I visit your factory?
A: Sure, You are always welcome to visit us.
){kind=link}