NPN 20m Through Beam Photoelectric Sensor for Speedlane Turnstile

• Type: Optical Opposed Safety Sensor
• Usage: Anti-theft
• Installation Mode: Built in
• Certification: CE
• Detection Type: Opposed Type
• Detection Object: Min ∅18 Opquare
• Model NO.: PM18T series
• Supply Voltage: 10-30V DC
• Detection Distance: 20m
• Cable: 2m Standard Length
• Warranty: 18 Months
• Transport Package: Plastic Bag
• Specification: ∅ 18
• Trademark: G-TEK
• Origin: Tianjin China
• HS Code: 9032900090
• Production Capacity: 5000 Units/Month

Product Description

 

Product Description

PM18T opposed type photoelectric sensor is our most popular model used at turnstiles. PM18T photoelectric sensor installed at the turnstile gate entrance is used to detect whether people intrude into the turnstile gate. When swiping the card outside the yellow line, there is no object at the gate entrance, and the sensor signal is normal, the wing door will open; if the person goes inside the yellow line, the sensor signal at the gate entrance changes, even if swiping the card, the wing door will not open. The purpose of this design is to prevent the opening and closing of the wing gate when swiping the card at a short distance, which may cause potential safety hazards, and also prevent ticket evasion. The product detection distance is 20m , with Reverse polarity protection, over-current and over-voltage protection functions, Epoxy resin sealing against rugged environment

Detailed Photos

Product Parameters

Photoelectricsensor	PM18T-2ND
Detection Type	Opposed type
Detecting Object	Min Φ18mm opaque object
Detecting Distance	20m
Supply Voltage	10~30V DC
No-load Current	Max.40mA
Response Time	Max.15ms
Light Source	Infrared LED(modulated)
Action Mode	Dark On
Control Output	NPN open collector
Indicator	Power indicator:Green   Action indicator:Red
Circuit Protection	Reverse polarity protection, short circuit protection, over voltage protection
Ambient Brightness	Sunlight:Max.11000lx;Fluorescent:Max.3000lx
AmbientTemperature	-20~+60ºC(Non-freezing),Storage:-25~+75ºC
Ambient Humidity	0~90%RH
Material	Housing:Cr plated Cu,Lens:PMMA
Cable	Emitter:blackΦ5.  2×0.3mm ²; Receiver: GreyΦ5.  3×0.2mm ²
Protection Rate	IP67
Accessory	Screw

Certifications

Installation Instructions

 

Product Application

Company Profile

Tianjin G-TEK Sensor Technology Co., Ltd. is located in Gaotai Science and Technology Park, Xiqing District, Tianjin and it is a technology-based enterprise specialized in R&D, production and customization of intelligent sensor system solutions. The company manufactures laser radar, TOF3D camera, laser ranging sensor, measurement and safety light curtain, photoelectric sensor, proximity switch and other products with core technology, serving intelligent transportation, logistics automation, factory automation, robot, intelligent security and other fields.