| Function Type: | Infrared Range and Communication System |
|---|---|
| Detection Type: | Infrared Light Beam |
| Output Signal Type: | Switching |
| Production Process: | Injection |
| Material: | Metal |
| IP Rating: | IP67 |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier PM18T opposed type photoelectric sensor is our most popular model used at turnstiles. PM18T photoelectric sensor installed at the turnstile gate entrance is used to detect whether people intrude into the turnstile gate. When swiping the card outside the yellow line, there is no object at the gate entrance, and the sensor signal is normal, the wing door will open; if the person goes inside the yellow line, the sensor signal at the gate entrance changes, even if swiping the card, the wing door will not open. The purpose of this design is to prevent the opening and closing of the wing gate when swiping the card at a short distance, which may cause potential safety hazards, and also prevent ticket evasion. The product detection distance is 20m , with Reverse polarity protection, over-current and over-voltage protection functions, Epoxy resin sealing against rugged environment.
| Photoelectric sensor | PM18T-2ND |
| Detection Type | Opposed type |
| Detecting Object | Min Φ18mm opaque object |
| Detecting Distance | 20m |
| Supply Voltage | 10~30V DC |
| No-load Current | Max.40mA |
| Response Time | Max.15ms |
| Light Source | Infrared LED(modulated) |
| Action Mode | Dark On |
| Control Output | NPN open collector |
| Indicator | Power indicator:Green Action indicator:Red |
| Circuit Protection | Reverse polarity protection, short circuit protection, over voltage protection |
| Ambient Brightness | Sunlight:Max.11000lx;Fluorescent:Max.3000lx |
| Ambient Temperature | -20~+60ºC(Non-freezing),Storage:-25~+75ºC |
| Ambient Humidity | 0~90%RH |
| Material | Housing:Cr plated Cu,Lens:PMMA |
| Cable | Emitter:blackΦ5. 2×0.3mm ²; Receiver: GreyΦ5. 3×0.2mm ² |
| Protection Rate | IP67 |
| Accessory | Screw |
| Product Series |
Product Model |
Supply Voltage | Sensing Distance | Housing | Output Mode |
Action Mode |
| PM18T | PM18T-2ND | 10~30V DC | 20m | stainless steel | NPN | Dark On |
| PM18T-2NL | NPN | Light On | ||||
| PM18T-2PD | PNP | Dark On | ||||
| PM18T-2PL | PNP | Light On |
Q: What kind of products do you manufacture?
A: Our products includes photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.
Q: Can I get some samples?
A: Yes, Sample orders are welcomed.
Q: Have photocell sensors 100% assembled well in stock?
A: We have some standard photocell sensors in stock with limited quantity; While
almost all photocell sensors will be newly produced according to your order.
Q: What is the delivery time?
A: 15-30 days for mass production depends on different products
Q: What is your MOQ?
A: We provide small MOQ for each item; it depends on your specific order.
Q: Do you have customization service?
A: Yes, We can provide customized products while the customization needs to meet certain quantity.
Q: Do you test all goods before delivery?
A: Yes, We have 100% test before delivery.
Q: What is your payment term?
A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.
11
Q: Do you provide warranty for the goods?
A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.
Q: May I visit your factory?
A: Sure, You are always welcome to visit us.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}