Product Description
- The working area is up to 10m((Reflectivity 90%))
- High anti-light interference is up to 80000Lux
- It can be used for outdoor and indoor
- Fast response time
- Lots of area groups can meet different scene settings
- Original data output can be used for measurement

At present, industrial AGV / AMR obstacle avoidance is mainly based on single line lidar. Compared with multi line lidar, single line lidar responds faster in angular frequency and sensitivity, and is very accurate in testing the distance and accuracy of surrounding obstacles.
AGV automatic obstacle avoidance refers to the process in which an AGV car, based on the collected status information of obstacles, detects static and dynamic objects that hinder its passage through sensors during automatic driving, stops effectively avoiding obstacles according to certain methods, and finally reaches the destination point. Obstacle avoidance LiDAR continuously scans the surrounding environment, detects obstacles in real-time, and controls them accordingly based on the detection results to avoid collisions with obstacles.
The main functions of LMO lidar are safety protection, area detection, etc. Connect the LMO lidar with the area designer software through USB to configure the equipment, and set the data graphic display and detection area (the field application can select the area through rs232/rs485/io/ethernet); Then judge whether there is object intrusion. If there is object intrusion, warning output realizes obstacle avoidance function and safety protection. NPN/PNP synchronous area output.(the instructions for upper computer for specific setting details)
Product Parameters
Parameter |
Laser Radar Sensor |
LMO series |
Supply voltage |
10-30VDC |
Working area |
0.08-10m(Reflectivity 90%) |
Protection area |
6m(Reflectivity 10%) |
Scanning angle |
270° |
Scanning Frequency |
25HZ |
Power |
<3W(starting 4W) |
Angular resolution |
0.5° |
Measurement resolution |
1mm |
Repeatability |
20mm |
Response time |
40ms |
Light source |
Infrared laser905nm |
Laser class |
I (safe to people's eyes) |
Output mode |
NPN/PNP |
Data interface |
USB(Micro-B),RS485,RS232,Ethernet,IO input |
Protection rating |
IP65 |
Work Temperature |
-20ºC to +55ºC |
Storage Temperature |
-30ºC to +60ºC |
Work Humidity |
<85%RH(no condensation) |
Light interference |
80000Lux |
Area groups |
32groupX3area |
Shape |
60mm×60mm×76.5mm |
Electrical connection |
Power wire |
Terminal number |
Color |
Signal Definition |
Function Description |
One |
Brown |
24V+ |
Power supply positive input |
Two |
Blue |
24V- |
Power supply negative input |
Three |
White |
OUT1 |
Area 1 output |
Four |
Yellow |
OUT3 |
Area 3 output |
Five |
Red white |
NC |
NC |
Six |
Black |
RS232TX/RS485A |
RS232TX/RS485A |
Seven |
Purple |
RS232RS/RS485B |
RS232RS/RS485B |
Eight |
Red |
RS232_GND |
RS232_GND/RS485NC |
Nine |
Grey |
COM_OUT |
output COM interface |
Ten |
Green |
OUT4 |
Area 4 output |
Eleven |
Blue White |
RS232_GND |
RS232_GND/RS485NC |
Twelve |
Orange |
OUT2 |
Area 2 output |
Thirteen |
Brown White |
NC |
NC |
Fourteen |
Green white |
NC |
NC |
Model |
Product name |
Model |
Detection distance |
Input interface |
Output interface |
LMO Laser Radar |
LMO101-NPN-232 |
0.05-10m |
232 |
3 area output+1 Sync output(NPN) |
LMO101-NPN-485 |
0.05-10m |
485 |
3 area output+1 Sync output(NPN) |
LMO101-NPN-IO |
0.05-10m |
5(I/O) |
3 area output+1 Sync output(NPN) |
LMO101-NPN-ENT |
0.05-10m |
Ethernet |
3 area output+1 Sync output(NPN) |
LMO101-PNP-232 |
0.05-10m |
232 |
3 area output+1 Sync output(PNP) |
LMO101-PNP-485 |
0.05-10m |
485 |
3 area output+1 Sync output(PNP) |
LMO101-PNP-IO |
0.05-10m |
5(I/O) |
3 area output+1 Sync output(PNP) |
LMO101-PNP-ENT |
0.05-10m |
Ethernet |
3 area output+1 Sync output(PNP) |
Certifications

Company Profile








FAQ
Q: What kind of products do you manufacture?
A: Our products includes photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.
Q: Can I get some samples?
A: Yes, Sample orders are welcomed.
Q: Have photocell sensors 100% assembled well in stock?
A: We have some standard photocell sensors in stock with limited quantity; While
almost all photocell sensors will be newly produced according to your order.
Q: What is the delivery time?
A: 15-30 days for mass production depends on different products
Q: What is your MOQ?
A: We provide small MOQ for each item; it depends on your specific order.
Q: Do you have customization service?
A: Yes, We can provide customized products while the customization needs to meet certain quantity.
Q: Do you test all goods before delivery?
A: Yes, We have 100% test before delivery.
Q: What is your payment term?
A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.
11
Q: Do you provide warranty for the goods?
A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.
Q: May I visit your factory?
A: Sure, You are always welcome to visit us.
Packaging & Shipping
