| Type: | Reflective Panels Type Photoelectric Sensor |
|---|---|
| Output Signal Type: | Switching Type |
| Production Process: | Normal Wirewound |
|
Still deciding? Get samples of US$ 27/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PMF80 series photoelectric sensor with laser light source, visible red class2 laser beams with good directivity, easier for alignment and debugging. It includes the reflective type and Through-beam type.
PMF80R reflective type with excellent optical performance, sensing range as far as 16m; Non-sphere optical lens totally eliminates stray light and overcomes interference from such light sources as sunlight; With high stability and performance, this product is widely used at industry doors, especially in a harsh outdoor environment.
The product has three major features:
Detection range 16m
aspherical optical lens ensures the anti-light performance
Laser light source for easy calibration and debugging
| Photoelectric sensor | PMF80R-RF |
| Detection Type | Retro-reflective |
| Detection Object | MinΦ60mm opaque object |
| Detection Range | 16m |
| Light Source | Laser tube (wavelength: 650nm) |
| Supply Voltage | 10~30V DC |
| Un-load current | Max.60mA |
| Response Time | Max.20ms |
| Action Mode | Selecting Light On or Dark On by potentiometer |
| Control Output | Relay output,(contact rating: 30VDC 1A resistance load, 120VAC,1A resistance load,contact component: 1C) |
| Indicator | Power indicator: green; action indicator: red |
| Protection Circuit | Over-voltage,over-current protection and reverse polarity protection |
| Ambient lightness | Sunlight: Max.60000Lux fluorescent: Max.3000Lux |
| Ambient Temperature | -30~+65ºC(Non-freezing) |
| Ambient Humidity | 0~90%RH |
| Material | Housing: ABS, Lens: PMMA |
| Cable | Emitter: Φ 5, 5×0.2mm² |
| Protection Rate | IP67 |
| Accessory | Screw: M4x30, Bracket: IB08 |
Product installation:
The installation of the photoelectric sensor is relatively simple, as long as the sensor is installed on the fixing frame, does not be blocked by other things, and ensures the working state is good.
Product maintenance:
Carry out regular inspections to check its sensitivity and some relatively safe measures. The use of these measures is also the most primitive function of our equipment for protection. For the maintenance of the application switch, we still have to do that we need to regularly Scrub or remove some dirt because only in this way our switch will not have some problems with sensitivity. Although the product has IP67-level protection facilities, the product cannot be immersed in water for too long. Therefore, when the product is used outdoors, be sure to check the product after encountering heavy rain.
There are 6 main products used in the industrial segmented door, namely microwave radar sensor, 3D person-car separator, economical light curtain, photoelectric sensor, reflector photoelectric sensor, and loop coil detector.| G-TEK Sensor Product List | ||
| 1 | Photoelectric Sensor | PF21/PF50/PMF55/PMF80 /PM18/PS18/PT12 series |
| 2 | Proximity Sensor | IM12/IM18/IM30/IF17 series |
| 3 | Infrared light curtain | LSM/LSMC/LSE/LSEC series |
| 4 | Safety light curtain | LSA series |
| 5 | Infrared vehicle separator | LHA/LHAC/LHN/LHNC series |
| 6 | Loop detector | GVD3/GVD1 series |
| 7 | Laser radar | LSD/LND series |
| 8 | 3D TOF product | GDC1100/GDC1101/GDC1102 |
| 9 | Other sensor product | Microwave radar, Revolving door Anti-pinching sensor |
){kind=link}